Search found 26 matches
- Sun Jan 19, 2020 11:33 pm
- Forum: Technical Discussions
- Topic: Bonnet
- Replies: 0
- Views: 5877
Bonnet
My mechanic has just pointed out that my bonnet does not have the indentation for the badge on it. I have a 1971 2400 coupe but I'm guessing it has a 2000 bonnet. Am I right in thinking that all the 2400's have the badge indentation in the bonnet?
- Sun Jan 19, 2020 11:29 pm
- Forum: Technical Discussions
- Topic: Steering Box Rebuild
- Replies: 2
- Views: 3301
Re: Steering Box Rebuild
Thanks Thomas
I didn't really want to open it, I was just wandering of I should, sounds like I shouldn't. I do want to get the lever arm off so that I can blast it and paint. Like you say, ts on very tight but hopefully I can get it off, if not I will have to paint it on the shaft.
I didn't really want to open it, I was just wandering of I should, sounds like I shouldn't. I do want to get the lever arm off so that I can blast it and paint. Like you say, ts on very tight but hopefully I can get it off, if not I will have to paint it on the shaft.
- Wed Jan 01, 2020 8:01 pm
- Forum: Technical Discussions
- Topic: Steering Box Rebuild
- Replies: 2
- Views: 3301
Steering Box Rebuild
Hi I am in the process of stripping down my Steering Box but am not too sure how far to go. I need to get the Pitman Arm off so that I can clean it up and paint it but can't decide whether I should just bite the bullet and do a total strip down and re-build. Has anyone ant experience on stripping do...
- Sun Mar 26, 2017 8:11 pm
- Forum: Technical Discussions
- Topic: Coupe Rear Bumper
- Replies: 1
- Views: 3632
Coupe Rear Bumper
Hi
Can anyone tell me if the Coupe 2400 has the same rear bumper as the Coupe 2000?
Cheers
Can anyone tell me if the Coupe 2400 has the same rear bumper as the Coupe 2000?
Cheers
- Tue Jan 17, 2017 9:08 pm
- Forum: Technical Discussions
- Topic: 2400 Rocker Trim
- Replies: 12
- Views: 13389
Re: 2400 Rocker Trim
Thanks Grand Turismo Thats great information and very helpful. It doesn't explain how my friend has a 152 cm and 164 cm long trim when your trim is 174cm, I wander if they made a shorter length (164cm) for either an earlier or later model 2400 Coupe. Can anyone else check the length of their rocker ...
- Mon Jan 16, 2017 8:54 pm
- Forum: Technical Discussions
- Topic: 2400 Rocker Trim
- Replies: 12
- Views: 13389
Re: 2400 Rocker Trim
Thanks Grand Turismo Can you tell me if your trim is a single piece or does the part that wraps around the wheel arch detach from the main trim? I know someone who has two single piece trims without the wrap around part, they look exactly like the 2000 trim but are a single piece and not the three p...
- Sat Jan 14, 2017 11:38 pm
- Forum: Technical Discussions
- Topic: 2400 Rocker Trim
- Replies: 12
- Views: 13389
2400 Rocker Trim
Hi Can anyone help me identify the correct rocker trim for a 2400 Coupe. I have seen several different versions: The Dino 2400 Spare Parts Manual shows a three piece trim similar to the 2000 but it wraps around the wheel arches. Many photos show a single piece trim that wraps around the wheel arches...
- Thu Nov 17, 2016 10:47 pm
- Forum: Technical Discussions
- Topic: need help from coupe owners
- Replies: 11
- Views: 14695
Re: need help from coupe owners
Good Luck Rob
Let me know how you get on, as long as the rubber is soft then you shouldn't have any problems.
Let me know how you get on, as long as the rubber is soft then you shouldn't have any problems.
- Wed Nov 16, 2016 8:56 pm
- Forum: Technical Discussions
- Topic: need help from coupe owners
- Replies: 11
- Views: 14695
Re: need help from coupe owners
Yeah, I took out the rear wind screen. It was a lot easier that I expected. Basically, I cut a heap of thin spacers out of some old sheet steel. I lifted the wind screen rubber from the inside of the car and pushed the spacers inbetween the rubber and the glass. I kept inserting the steel right arou...
- Wed Nov 16, 2016 8:37 pm
- Forum: Technical Discussions
- Topic: Front Upper Wishbone Bush
- Replies: 2
- Views: 4152
Re: Front Upper Wishbone Bush
Thanks Rick
Thats the route I am going to take, cut a slot in it and then get some heat on it to try and break the bond.
Cheers
Thats the route I am going to take, cut a slot in it and then get some heat on it to try and break the bond.
Cheers