Fiat Dino Forum (FDF)

Exactly. You mount the traverse where the engine sits on back on with four screws, the lower wishbone back on to the traverse with the two screws and stick the steering linkage back together, then you can put on the wheels and roll the chassis. You don’t need to put the anti roll bar back on to move...

Hi Richard, I can share my experience and the way I did it. And to your questions: - Fiat Dino has also a Pilot bushing in the crankshaft, should be exchanged when clutch or engine gets renewed - Engine should not rattle and sound churning, but Whiny sound is indeed kind of Dino sound. Chain tension...

Yes absolutely, these are the rights ones! In Common Internet platforms there are many Sets of these, usually there are Two Pairs of "plates" in it, the Dino needs the bigger ones.
KR Thomas

Don’t ignore the status and shape of the rubber parts on top of the springs! If they are worn as they often are after 50 years you have an influence on your height as well,

Yes you are right. Not ideal, however, the sills should have an opening where the water can drain, but often this whole is closed with dirt etc.or was removed when sills are replaced not completely as original.

Hi, To my knowledge there are only three pieces mounted on boards: 167239 in the diagram on right and left side. They are then attached with two screws each to the body, at the rear side. Unfortunately I have no picture right now. Then there is a box around the gas tank intake. That is not on the di...

Hi, I ordered this year carpets for my 2400 Coupe from rapides luxe https://www.tapis-deluxe.com/de/4577-teppichsatz-fiat-dino-2400-coupe-1969-1972.html for cabin and boot. I am happy with quality and communication, they fit well. The pieces for the box around the gas tank entry are not included, bu...

I think I have used 8x14.
And on the 2,4 Dino in addition 6x11 for the return line.

Better use a modern line / modern material. Safety first and you did not see it anyhow. That’s how I do / did it.

If you want to have it not loosing oil, use sealant.