Search found 187 matches
- Thu Jan 06, 2022 9:16 pm
- Forum: Technical Discussions
- Topic: Should I replace the suspension spring?
- Replies: 8
- Views: 2637
Re: Should I replace the suspension spring?
Don’t ignore the status and shape of the rubber parts on top of the springs! If they are worn as they often are after 50 years you have an influence on your height as well,
- Mon Jan 03, 2022 5:40 pm
- Forum: The Fiat Dino
- Topic: Rear 3/4 Window drainage
- Replies: 2
- Views: 2719
Re: Rear 3/4 Window drainage
Yes you are right. Not ideal, however, the sills should have an opening where the water can drain, but often this whole is closed with dirt etc.or was removed when sills are replaced not completely as original.
- Mon Dec 27, 2021 8:50 pm
- Forum: Technical Discussions
- Topic: Carpet Pieces
- Replies: 9
- Views: 6603
Re: Carpet Pieces
Hi, To my knowledge there are only three pieces mounted on boards: 167239 in the diagram on right and left side. They are then attached with two screws each to the body, at the rear side. Unfortunately I have no picture right now. Then there is a box around the gas tank intake. That is not on the di...
- Thu Dec 23, 2021 10:56 am
- Forum: Technical Discussions
- Topic: Carpet Pieces
- Replies: 9
- Views: 6603
Re: Carpet Pieces
Hi, I ordered this year carpets for my 2400 Coupe from rapides luxe https://www.tapis-deluxe.com/de/4577-teppichsatz-fiat-dino-2400-coupe-1969-1972.html for cabin and boot. I am happy with quality and communication, they fit well. The pieces for the box around the gas tank entry are not included, bu...
- Mon Dec 13, 2021 5:52 pm
- Forum: Technical Discussions
- Topic: Fuel Sending Unit in 2 Liter
- Replies: 3
- Views: 1313
Re: Fuel Sending Unit in 2 Liter
I think I have used 8x14.
And on the 2,4 Dino in addition 6x11 for the return line.
And on the 2,4 Dino in addition 6x11 for the return line.
- Sun Dec 12, 2021 10:12 pm
- Forum: Technical Discussions
- Topic: Fuel Sending Unit in 2 Liter
- Replies: 3
- Views: 1313
Re: Fuel Sending Unit in 2 Liter
Better use a modern line / modern material. Safety first and you did not see it anyhow. That’s how I do / did it.
- Fri Sep 03, 2021 9:13 pm
- Forum: Technical Discussions
- Topic: 1967 2.0 Spider #665
- Replies: 5
- Views: 2146
Re: 1967 2.0 Spider #665
If you want to have it not loosing oil, use sealant.
- Thu Sep 02, 2021 8:06 pm
- Forum: Technical Discussions
- Topic: Later model 2.0 Spider (#663) controls
- Replies: 8
- Views: 2972
Re: Later model 2.0 Spider (#663) controls
Right. This Change seem to have happened somewhere in the middle of Serie 2 at around chassis # 800...
- Tue Aug 31, 2021 7:31 am
- Forum: Technical Discussions
- Topic: Later model 2.0 Spider (#663) controls
- Replies: 8
- Views: 2972
Re: Later model 2.0 Spider (#663) controls
Hi, as the Serie 2 Spider models are very similar to the 2,4 spiders on the inside, you can check the 2,4 manual. See here an Italian version but should help. Look at #22 and 23.
- Thu Jul 08, 2021 5:58 am
- Forum: Market
- Topic: Dino Spider at Auction
- Replies: 17
- Views: 6004
Re: Dino Spider at Auction
You can use special liners, they are also readily available, in which you can use the 2,4 pistons. Together with the 2 Liter crankshaft it sums up to 2,3 liter. The so called 2,3 liter Conversion. The bore equals then the 2,4 liter. I guess this is done/meant here.