Search found 111 matches
- Tue Jan 26, 2021 9:52 pm
- Forum: Technical Discussions
- Topic: How do I remove trim Dino coupe 2000?
- Replies: 4
- Views: 2668
Re: How do I remove trim Dino coupe 2000?
I would use a thin wide metal spatula and slide it between the bodywork and trim ,note there are two clips within that you must avoid,then gently ease the trim off. Do not use screwdiver or similar as this will mark the paint and trim.
- Tue Nov 03, 2020 4:42 pm
- Forum: Technical Discussions
- Topic: Chrome trim clips
- Replies: 3
- Views: 3590
Re: Chrome trim clips
Hi Dario, thanks for the reply but those clips are not the same dimensions as on my 2.0 coupe. See the one on the right on my drawing with approximate sizes.
- Mon Oct 26, 2020 8:38 am
- Forum: Technical Discussions
- Topic: Chrome trim clips
- Replies: 3
- Views: 3590
Chrome trim clips
Does anyone know where else to buy the trim clips for the chrome strip that runs down the side of the coupe bodywork. The ones from dinoparts are too expensive at €233 for a handful of plastic clips.I have found these which are the same type but I believe a different size. https://www.ebay.co.uk/itm...
- Sun Oct 18, 2020 3:32 pm
- Forum: Technical Discussions
- Topic: Dino coupe 2000 front grill finish
- Replies: 7
- Views: 5906
Re: Dino coupe 2000 front grill finish
I have never seen a 2.0 grill with any paint on and I have seen a great many cars.
- Tue Sep 29, 2020 9:14 pm
- Forum: Technical Discussions
- Topic: Transmission mount 1967 coupe 2000
- Replies: 2
- Views: 2526
Re: Transmission mount 1967 coupe 2000
I can't remember exactly how I got the same superformance mount to go in mine but I remember it was a very tight fit. I do not believe it should be so tight but what else can you do.
- Thu Sep 03, 2020 8:52 am
- Forum: Technical Discussions
- Topic: Door check strap
- Replies: 9
- Views: 5236
Re: Door check strap
The alfa gtv strap is 95mm and too short. The Montreal strap is the same size as the dino at about 103mm.Johnny the metal part you show is only the internal part of the strap so can't be used as is.
- Thu Aug 27, 2020 6:16 pm
- Forum: Technical Discussions
- Topic: Door check strap
- Replies: 9
- Views: 5236
Door check strap
Following an unsuccessful search on here for replacement door check straps for the coupe, I have found some new ones which may fit our cars.
https://classicalfa.com/mn054-montreal- ... strap-kit/
Did Bertone not make the bodies for the Montreal and our coupes.
https://classicalfa.com/mn054-montreal- ... strap-kit/
Did Bertone not make the bodies for the Montreal and our coupes.
- Mon Aug 24, 2020 9:04 pm
- Forum: Technical Discussions
- Topic: How do I know if engine mounts need replacing?
- Replies: 7
- Views: 5449
Re: How do I know if engine mounts need replacing?
Where are you buying the replacement mounts from, and are they the original type or the round type.
- Tue Aug 18, 2020 7:42 am
- Forum: Technical Discussions
- Topic: Engine bay lights
- Replies: 4
- Views: 3663
Re: Engine bay lights
The wiring diagram shows the power comes from position G on the fuse box, but it's impossible to trace back the wires from the engine bay lights once it enters the main loom and then goes behind the dash. What I cant understand is that this system is original and has never been touched .
- Fri Aug 14, 2020 6:38 am
- Forum: Technical Discussions
- Topic: Engine bay lights
- Replies: 4
- Views: 3663
Re: Engine bay lights
I forgot to ask how would they normally light up. Is it only when the main lights are on or any time the bonnet is opened.