Search found 190 matches
- Sun Feb 06, 2022 4:32 am
- Forum: Technical Discussions
- Topic: Coupe 2400 engine removal
- Replies: 12
- Views: 2946
Re: Coupe 2400 engine removal
Exactly. You mount the traverse where the engine sits on back on with four screws, the lower wishbone back on to the traverse with the two screws and stick the steering linkage back together, then you can put on the wheels and roll the chassis. You don’t need to put the anti roll bar back on to move...
- Sat Feb 05, 2022 11:28 am
- Forum: Technical Discussions
- Topic: Coupe 2400 engine removal
- Replies: 12
- Views: 2946
Re: Coupe 2400 engine removal
Hi Richard, I can share my experience and the way I did it. And to your questions: - Fiat Dino has also a Pilot bushing in the crankshaft, should be exchanged when clutch or engine gets renewed - Engine should not rattle and sound churning, but Whiny sound is indeed kind of Dino sound. Chain tension...
- Sun Jan 23, 2022 7:13 pm
- Forum: Technical Discussions
- Topic: Coil springs
- Replies: 13
- Views: 10400
Re: Coil springs
Yes absolutely, these are the rights ones! In Common Internet platforms there are many Sets of these, usually there are Two Pairs of "plates" in it, the Dino needs the bigger ones.
KR Thomas
KR Thomas
- Thu Jan 06, 2022 9:16 pm
- Forum: Technical Discussions
- Topic: Should I replace the suspension spring?
- Replies: 8
- Views: 2651
Re: Should I replace the suspension spring?
Don’t ignore the status and shape of the rubber parts on top of the springs! If they are worn as they often are after 50 years you have an influence on your height as well,
- Mon Jan 03, 2022 5:40 pm
- Forum: The Fiat Dino
- Topic: Rear 3/4 Window drainage
- Replies: 2
- Views: 2728
Re: Rear 3/4 Window drainage
Yes you are right. Not ideal, however, the sills should have an opening where the water can drain, but often this whole is closed with dirt etc.or was removed when sills are replaced not completely as original.
- Mon Dec 27, 2021 8:50 pm
- Forum: Technical Discussions
- Topic: Carpet Pieces
- Replies: 9
- Views: 6641
Re: Carpet Pieces
Hi, To my knowledge there are only three pieces mounted on boards: 167239 in the diagram on right and left side. They are then attached with two screws each to the body, at the rear side. Unfortunately I have no picture right now. Then there is a box around the gas tank intake. That is not on the di...
- Thu Dec 23, 2021 10:56 am
- Forum: Technical Discussions
- Topic: Carpet Pieces
- Replies: 9
- Views: 6641
Re: Carpet Pieces
Hi, I ordered this year carpets for my 2400 Coupe from rapides luxe https://www.tapis-deluxe.com/de/4577-teppichsatz-fiat-dino-2400-coupe-1969-1972.html for cabin and boot. I am happy with quality and communication, they fit well. The pieces for the box around the gas tank entry are not included, bu...
- Mon Dec 13, 2021 5:52 pm
- Forum: Technical Discussions
- Topic: Fuel Sending Unit in 2 Liter
- Replies: 3
- Views: 1318
Re: Fuel Sending Unit in 2 Liter
I think I have used 8x14.
And on the 2,4 Dino in addition 6x11 for the return line.
And on the 2,4 Dino in addition 6x11 for the return line.
- Sun Dec 12, 2021 10:12 pm
- Forum: Technical Discussions
- Topic: Fuel Sending Unit in 2 Liter
- Replies: 3
- Views: 1318
Re: Fuel Sending Unit in 2 Liter
Better use a modern line / modern material. Safety first and you did not see it anyhow. That’s how I do / did it.
- Fri Sep 03, 2021 9:13 pm
- Forum: Technical Discussions
- Topic: 1967 2.0 Spider #665
- Replies: 5
- Views: 2154
Re: 1967 2.0 Spider #665
If you want to have it not loosing oil, use sealant.