Newbie looking for some help/parts

All about our Fiat Dino Coupes and Spiders

Moderators: doublegarage, Philt68

Post Reply
mbedlam
Posts: 18
Joined: Sat Jun 28, 2014 2:19 pm
Dino: Fiat Dino 2.0 Coupe

Newbie looking for some help/parts

Post by mbedlam »

Hi Everyone
I bought a black steering wheel 1967 2 litre coupe, strangely it looks never to have had seat belts fitted.
There are fixing points for the receiver on the transmission tunnel and the lower point on the longer belt on the outer floor.
But I cannot find a fixing point for the higher shoulder point, I have removed the B pillar trim but no point, also the metal is very slim and I cannot imagine the fixing was there.

My question please to anyone with an early/2 litre Coupe Where is the upper seat belt fixing point?
Photos would be greatly appreciated.

I have also just noticed that the vented interior trim panels below the rear passenger side window which houses the window winder/courtesy light are broken.
Does anyone have or know where to source these items?

Thanks
Martin
Barnfind
Posts: 172
Joined: Wed Feb 18, 2015 11:32 pm
Dino: Fiat Dino 2.4 Coupe
Location: Spain

Re: Newbie looking for some help/parts

Post by Barnfind »

viewtopic.php?f=4&t=504

There is a thread that it might be of your interest..

Regards..
lcooper
Posts: 22
Joined: Wed Nov 20, 2013 10:38 am
Dino: Fiat Dino 2.0 Coupe

Re: Newbie looking for some help/parts

Post by lcooper »

Post Reply