Photos of coupe inner body section needed.

All about our Fiat Dino Coupes and Spiders

Moderators: Philt68, doublegarage

Photos of coupe inner body section needed.

Postby 4cambob » Wed Apr 12, 2017 1:12 pm

I would be grateful if someone has a photo of the panel between the front wing/fender and the A pillar box section where the door hinges mount to. The lower section of mine was just thin air due to rust and I need to fabricate a new one. These are photos of the area and the finished hinge mounting box section.
Attachments
fiat 610.jpg
fiat 609.jpg
fiat 566.jpg
4cambob
 
Posts: 25
Joined: Sat Sep 24, 2016 9:19 am
Dino: Fiat Dino 2.0 Coupe

Re: Photos of coupe inner body section needed.

Postby Georg » Wed Apr 12, 2017 9:19 pm

Does this help?
Attachments
Bild010.jpg
Georg
 
Posts: 64
Joined: Thu Jan 02, 2014 6:55 pm
Location: Germany
Dino: Fiat Dino 2.4 Spider

Re: Photos of coupe inner body section needed.

Postby Ribolla_67 » Thu Apr 13, 2017 8:48 am

IMG_1210.jpg
IMG_1209.jpg


Found these pictures, maybe helpful. Fortunately NOT my car...
Ribolla_67
 
Posts: 14
Joined: Thu May 19, 2016 9:53 am
Dino: Fiat Dino 2.4 Coupe

Re: Photos of coupe inner body section needed.

Postby Ribolla_67 » Thu Apr 13, 2017 8:54 am

... the bodywork spare parts catalogue may help as well...
Ribolla_67
 
Posts: 14
Joined: Thu May 19, 2016 9:53 am
Dino: Fiat Dino 2.4 Coupe

Re: Photos of coupe inner body section needed.

Postby 4cambob » Thu Apr 13, 2017 4:54 pm

Thank you very much Georg,yes that is what I was looking for. I would also like to ask if you know how the front wing attaches to the outer sill where there would be a visible vertical groove. I would guess this would be brazed/gas welded, certainly not spot or mig welded.
4cambob
 
Posts: 25
Joined: Sat Sep 24, 2016 9:19 am
Dino: Fiat Dino 2.0 Coupe

Re: Photos of coupe inner body section needed.

Postby 4cambob » Thu Apr 13, 2017 5:12 pm

Thank you Ribolla_67 . And there was I thinking my car must be the only rusty car out there. It seems this area is very susceptible to corrosion. I will at a latter stage try and fabricate a fibreglass inner wheel arch as there are too many items under the front wings which are all exposed . This is the first time I have seen the parts catalogue,it is very useful to see.
4cambob
 
Posts: 25
Joined: Sat Sep 24, 2016 9:19 am
Dino: Fiat Dino 2.0 Coupe

Re: Photos of coupe inner body section needed.

Postby Tobi » Thu Apr 13, 2017 6:53 pm

4cambob wrote:This is the first time I have seen the parts catalogue,it is very useful to see.

You might find more helpful material in the Library section of this forum ;)
User avatar
Tobi
Site Admin
 
Posts: 265
Joined: Thu Nov 14, 2013 7:56 am
Location: Upper Palatinate - Bavaria
Dino: Fiat Dino 2.4 Coupe

Re: Photos of coupe inner body section needed.

Postby Fanalone » Sat Jun 10, 2017 5:34 pm

Hi


German company Lokari produces inner wings for many brands also to our Fiat Dino's:
https://www.lokari.de/epages/62716287.sf/en_GB/?ObjectPath=/Shops/62716287/Products/IKF-0599-0600
BC5222
Fanalone
 
Posts: 21
Joined: Wed Jul 01, 2015 7:15 pm
Dino: Fiat Dino 2.4 Coupe

Re: Photos of coupe inner body section needed.

Postby Argonaut » Mon Jun 12, 2017 8:21 am

Be careful... only buy from American companies... Donald is after you :D
Argonaut
 
Posts: 55
Joined: Wed Apr 23, 2014 4:41 pm
Dino: Fiat Dino 2.0 Spider

Re: Photos of coupe inner body section needed.

Postby maduno » Tue Jun 13, 2017 11:43 am

Has anyone used these inner liners from Lokari on their coupe?The standard arrangement with no mud and water protection is very poor and liners if possible to use would seem like a good outcome.
maduno
 
Posts: 20
Joined: Sat Sep 05, 2015 12:19 am
Dino: Fiat Dino 2.4 Coupe

Next

Return to The Fiat Dino

Who is online

Users browsing this forum: No registered users and 1 guest