Hi:
I have a 67 coupe with a non-working pressure gauge. I want to go ahead and pull the whole dashboard out since I need to send that out for repair anyway. However, I have no clue how to remove the dash. Can anyone provide any advice?
Thanks in advance!
Gordon
67 coupe dashboard removal
Moderator: alh
- Tobi
- Site Admin
- Posts: 535
- Joined: Thu Nov 14, 2013 7:56 am
- Dino: Fiat Dino 2.4 Coupe
- Location: Upper Palatinate - Bavaria
Re: 67 coupe dashboard removal
This should have been dscussed here already, but I couldn't find it quickly.
Do you understand German? http://www.dino-register-deutschland.de ... 303&p=1042
Do you understand German? http://www.dino-register-deutschland.de ... 303&p=1042
- fdus172
- Posts: 49
- Joined: Wed Nov 27, 2013 10:02 pm
- Dino: Fiat Dino 2.0 Coupe
- Location: Portland, Oregon, USA
Re: 67 coupe dashboard removal
(1) are you sure it's the gauge and not the sending unit?
(2) do you need to pull the entire dash? or just the top cap?
Rick Wohleber
Portland Or.
'67 Coupe
(2) do you need to pull the entire dash? or just the top cap?
Rick Wohleber
Portland Or.
'67 Coupe
Re: 67 coupe dashboard removal
Tobi:Tobi wrote:This should have been dscussed here already, but I couldn't find it quickly.
Do you understand German? http://www.dino-register-deutschland.de ... 303&p=1042
I believe the link you sent me is in reference to the 2.4L coupe, the coupe with the newer style dashboard? Any leads for the 1st generation or 2.0L dash removal?
Gordon