Reproduction labels for large Dinoplex

Technical Topics and Discussions

Moderator: alh

Post Reply
bhiggins2
Posts: 140
Joined: Wed Jun 24, 2020 5:54 pm
Dino: Fiat Dino 2.0 Coupe

Reproduction labels for large Dinoplex

Post by bhiggins2 »

The original label plates on my Dinoplex are completely illegible. I purchased the reproduction labels from Superformance and the one label plate is too long and the holes don't line up with the mounting pegs on the Dinoplex cover. Has anyone else run into this problem? The text portion is fine, but the border part is too large. I could scan, re-size with software, print out on etch resist and etch a proper sized aluminm plate, but wanted to see if there was a quicker alternative without chiseling off the mounting pegs on the Dinoplex and recreating them with something that is glued on to "look proper". I took a small file and reduced the mounting pegs down so they fit the holes of the old & new plates without distortion. Ben.
Attachments
20200923_152826.jpg
20200923_152642.jpg
20200907_143107.jpg
Stefan2000
Posts: 167
Joined: Sat Feb 21, 2015 8:42 am
Dino: Fiat Dino 2.0 Coupe
Location: The Netherlands
Contact:

Re: Reproduction labels for large Dinoplex

Post by Stefan2000 »

20161211_130119.jpg
For that exact reason i made them myself. Also the red/black border is incorrect with the SF plates.
The ones i made, i made them with only a marker for the holes so that i could drill the holes myself at the correct place.
I might still have one set left, let me know if you are interested.
apenberrys
Posts: 4
Joined: Fri Oct 10, 2014 3:53 am
Dino: Fiat Dino 2.0 Spider
Location: Orlando, Florida USA

Re: Reproduction labels for large Dinoplex

Post by apenberrys »

Realize this is an older post. But im in the process of retrofitting the Dinoplex to my early 2000 Spider.

Stefan - Do you still have the reproduction labels available? I’m in Orlando Florida
'67 Spider - #220 (owned since 1983)
Stefan2000
Posts: 167
Joined: Sat Feb 21, 2015 8:42 am
Dino: Fiat Dino 2.0 Coupe
Location: The Netherlands
Contact:

Re: Reproduction labels for large Dinoplex

Post by Stefan2000 »

Yes i have them, you can find them here:
https://www.elshoutengineering.com/fiat-dino-parts
Post Reply