Upper + Lower Ball joints

Technical Topics and Discussions

Moderator: alh

Post Reply
croker
Posts: 52
Joined: Sat Apr 19, 2014 6:14 pm
Dino: Fiat Dino 2.0 Coupe

Upper + Lower Ball joints

Post by croker »

Hi, I have read somewhere the front suspension ball joints are the same as Fiat 125/Argenta and other fiat/SEAT cars. Can anyone confirm this or give me the part numbers of both ball joints? I looked on the parts catalogue but the ball joints arent listed...only the suspension arms
Thanks
Dinoswede
Posts: 111
Joined: Sat Apr 05, 2014 4:22 pm
Dino: Fiat Dino 2.0 Spider

Re: Upper + Lower Ball joints

Post by Dinoswede »

Re the upper and lower front ball joints; Yes, you are right, the original parts are riveted to the upper and lower Control arms. You have to drill out these rivets to
exchange the ball joints. The original Fiat part number for the upper ball joint is 5969335 and the lower ball joint is 4355787. As far as I can remember, at least one of these were used in the 124/125/132 models, as well. Hoping this will help you!

Dinoswede
Post Reply