First post, no doubt of many: owned my 2.0 Coupe since the late 80's but am now getting it back on the road after 12 years sitting. Interior all apart, the doors are off, and I must operate the windows in the doors. Does anyone know how to apply 12V and ground to the 4 wires (black, brown, white, gray) at the motor in order to get the motor to power the window down? How about up?
Thanks in advance
Ben
Coupe #1463
Powering Coupe windows, doors off the car
Moderator: alh
-
- Posts: 10
- Joined: Fri Aug 12, 2016 5:17 pm
- Dino: Fiat Dino 2.0 Coupe
- Tobi
- Site Admin
- Posts: 535
- Joined: Thu Nov 14, 2013 7:56 am
- Dino: Fiat Dino 2.4 Coupe
- Location: Upper Palatinate - Bavaria
Re: Powering Coupe windows, doors off the car
This thread might help: http://fiatdinoforum.org/viewtopic.php?f=19&t=110
-
- Posts: 10
- Joined: Fri Aug 12, 2016 5:17 pm
- Dino: Fiat Dino 2.0 Coupe
Re: Powering Coupe windows, doors off the car
Thank you, Tobi. I already had looked at my wiring diagram (the English version) and didn't see the window motors. But there they are in the Italian one! I'll try to figure it out from that but no promises I won't be back. Thanks much.
Ben
Ben
-
- Posts: 62
- Joined: Tue Jun 02, 2015 7:00 am
- Dino: Fiat Dino 2.0 Coupe
Re: Powering Coupe windows, doors off the car
I just went through this on a 67 2.0! The wiring diagram for the 2.4 liter Dino has the power window schematic, the 2.0 diagram does not.
Enjoy,
John Pergolizzi
Enjoy,
John Pergolizzi