Powering Coupe windows, doors off the car

Technical Topics and Discussions

Moderator: alh

Post Reply
outofaustin
Posts: 10
Joined: Fri Aug 12, 2016 5:17 pm
Dino: Fiat Dino 2.0 Coupe

Powering Coupe windows, doors off the car

Post by outofaustin »

First post, no doubt of many: owned my 2.0 Coupe since the late 80's but am now getting it back on the road after 12 years sitting. Interior all apart, the doors are off, and I must operate the windows in the doors. Does anyone know how to apply 12V and ground to the 4 wires (black, brown, white, gray) at the motor in order to get the motor to power the window down? How about up?
Thanks in advance
Ben
Coupe #1463
User avatar
Tobi
Site Admin
Posts: 528
Joined: Thu Nov 14, 2013 7:56 am
Dino: Fiat Dino 2.4 Coupe
Location: Upper Palatinate - Bavaria

Re: Powering Coupe windows, doors off the car

Post by Tobi »

outofaustin
Posts: 10
Joined: Fri Aug 12, 2016 5:17 pm
Dino: Fiat Dino 2.0 Coupe

Re: Powering Coupe windows, doors off the car

Post by outofaustin »

Thank you, Tobi. I already had looked at my wiring diagram (the English version) and didn't see the window motors. But there they are in the Italian one! I'll try to figure it out from that but no promises I won't be back. Thanks much.
Ben
jtperry8sf9
Posts: 62
Joined: Tue Jun 02, 2015 7:00 am
Dino: Fiat Dino 2.0 Coupe

Re: Powering Coupe windows, doors off the car

Post by jtperry8sf9 »

I just went through this on a 67 2.0! The wiring diagram for the 2.4 liter Dino has the power window schematic, the 2.0 diagram does not.

Enjoy,

John Pergolizzi
Post Reply