Does anyone know of a source for the door weatherstrip "rail" for a 2000 Coupe? By "rail" I mean the plastic strip that screws to the body and which holds the door weatherstrip in place. If available, I'd expect it to be sold in bulk and cut to length from that.
Many thanks,
Ben
#1463
Door Weatherstrip "rail"
Moderator: alh
-
outofaustin
- Posts: 10
- Joined: Fri Aug 12, 2016 5:17 pm
- Dino: Fiat Dino 2.0 Coupe
-
alexjordan
- Posts: 13
- Joined: Mon Dec 23, 2013 10:34 pm
- Dino: Fiat Dino 2.0 Coupe
Re: Door Weatherstrip "rail"
Try this site and have a look at the s/s strip shown. I think this may be what you are looking for
https://www.flickr.com/photos/30179317@ ... 663572479/
Alex
https://www.flickr.com/photos/30179317@ ... 663572479/
Alex
-
outofaustin
- Posts: 10
- Joined: Fri Aug 12, 2016 5:17 pm
- Dino: Fiat Dino 2.0 Coupe
Re: Door Weatherstrip "rail"
Thanks, Alex.
Well, yes and no: if you scroll over to the picture that shows the rear of the left door opening with its stainless steel trim around the door latch and trunk release and you were to pull up the weatherstrip that shows to the left of the stainless that seals the door, you'd be looking at the "rail" that the weatherstrip fits into. That's the "rail" material I'm looking for.
Thanks again,
Ben
Well, yes and no: if you scroll over to the picture that shows the rear of the left door opening with its stainless steel trim around the door latch and trunk release and you were to pull up the weatherstrip that shows to the left of the stainless that seals the door, you'd be looking at the "rail" that the weatherstrip fits into. That's the "rail" material I'm looking for.
Thanks again,
Ben