Hi
Can anyone give me some advice on how best to remove the Front Upper Wishbone Bush? I can't get it into a press because of the shape of it.
Any help would be very much appreciated.
Thanks
Front Upper Wishbone Bush
Moderator: alh
- fdus172
- Posts: 49
- Joined: Wed Nov 27, 2013 10:02 pm
- Dino: Fiat Dino 2.0 Coupe
- Location: Portland, Oregon, USA
Re: Front Upper Wishbone Bush
It was crude but.... I used a long metal cutting blade on a jig saw, cutting from the inside, and removed a section, the remainder came out easily. Just be careful not to cut into the wishbone...
Rick Wohleber
Portland Or
Rick Wohleber
Portland Or
Re: Front Upper Wishbone Bush
Thanks Rick
Thats the route I am going to take, cut a slot in it and then get some heat on it to try and break the bond.
Cheers
Thats the route I am going to take, cut a slot in it and then get some heat on it to try and break the bond.
Cheers