Wanted: vent window hinge

For Sale and Wanted (commercial postings will get you banned)

Moderators: doublegarage, Philt68

Post Reply
Scalino
Posts: 179
Joined: Mon Jul 24, 2017 7:22 pm
Dino: Fiat Dino 2.4 Spider
Location: The Netherlands

Wanted: vent window hinge

Post by Scalino »

I’m looking for a passenger side vent window hinge for a spider. I’m not sure wether the coupe has the same one.

Below is a picture of the one that came off the car (the broken one) and one for a 124 Spider, which is shallow by about 3mm. I could make the 124 one work with a spacer, but I would prefer an original one as no modification to the rubber is necessary.
Attachments
CB0F7962-A7EB-4B7C-A69E-E8BE014AEA36.jpeg
Scalino
Posts: 179
Joined: Mon Jul 24, 2017 7:22 pm
Dino: Fiat Dino 2.4 Spider
Location: The Netherlands

Re: Wanted: vent window hinge

Post by Scalino »

Anyone?
dinoverde
Posts: 330
Joined: Wed Nov 27, 2013 5:56 am
Dino: Fiat Dino 2.0 Spider

Re: Wanted: vent window hinge

Post by dinoverde »

fiat 124 spider will work..
try this link:https://www.ebay.com/itm/FIAT-124-SPIDE ... Sw3bBckL7E
Scalino
Posts: 179
Joined: Mon Jul 24, 2017 7:22 pm
Dino: Fiat Dino 2.4 Spider
Location: The Netherlands

Re: Wanted: vent window hinge

Post by Scalino »

Indeed you can make it work, but it’s not the same. The 124 one is pictured on the right in my photo!
alfredino
Posts: 61
Joined: Mon Oct 26, 2015 1:29 pm
Dino: Fiat Dino 2.4 Coupe

Re: Wanted: vent window hinge

Post by alfredino »

Hi,

I have only a complete triangle for a Dino Spider!

Best
Last edited by alfredino on Thu Dec 09, 2021 1:51 pm, edited 1 time in total.
alfredino
Posts: 61
Joined: Mon Oct 26, 2015 1:29 pm
Dino: Fiat Dino 2.4 Coupe

Re: Wanted: vent window hinge

Post by alfredino »

Here a photo of Spider triangles, one side w/o glass!
Attachments
F2BDAB87-326C-4ABB-80BF-CFFED7A06DF6.jpeg
Scalino
Posts: 179
Joined: Mon Jul 24, 2017 7:22 pm
Dino: Fiat Dino 2.4 Spider
Location: The Netherlands

Re: Wanted: vent window hinge

Post by Scalino »

Hi Alfredo, thanks for the offer. I made a spacer, so I should be able to get it to work for now. I do want a correct hinge in the end, so I’ll keep this in mind for the next time I place an order with you!
Post Reply