WTB 2400 Coupe A-pillar trim piece

For Sale and Wanted (commercial postings will get you banned)

Moderators: doublegarage, Philt68

Post Reply
User avatar
doublegarage
Posts: 212
Joined: Thu Nov 14, 2013 4:22 am
Dino: Fiat Dino 2.4 Coupe
Location: California, USA

WTB 2400 Coupe A-pillar trim piece

Post by doublegarage »

My car's A-pillars have the main piece of stainless attached to the body, but are missing the smaller stainless-steel piece that retains the thin rubber blade.

Therefore, I'm looking for these narrow pieces that attach the thin rubber seal to the A-pillar.

Thanks,

-Richard
Attachments
a-pillar trim.jpg
User avatar
ThomasK
Posts: 187
Joined: Mon Dec 30, 2013 12:44 pm
Dino: Fiat Dino 2.4 Coupe

Re: WTB 2400 Coupe A-pillar trim piece

Post by ThomasK »

Have a look on eBay, Article number: 152101405180

"Open the driver's door on your Fiat Dino Coupe, and look for a Stainless Steel trim piece that extends on the exterior of the A-Pillar from the front window height to the roof line.
See the attached picture for the location. This trim piece comes with the rubber gasket and the metal holding piece as well, all in near perfect condition. No nicks, dents, or dings. "
User avatar
doublegarage
Posts: 212
Joined: Thu Nov 14, 2013 4:22 am
Dino: Fiat Dino 2.4 Coupe
Location: California, USA

Re: WTB 2400 Coupe A-pillar trim piece

Post by doublegarage »

Yes, saw that - just wondering if anybody had the retainer strip alone.

Thanks Thomas.
User avatar
doublegarage
Posts: 212
Joined: Thu Nov 14, 2013 4:22 am
Dino: Fiat Dino 2.4 Coupe
Location: California, USA

Re: WTB 2400 Coupe A-pillar trim piece

Post by doublegarage »

Never mind - I attached the rubber strip with some 3M 38583 exterior attachment tape - the good stuff. I've probably slammed the door 50 times today and it's still attached.

I always seem to have trouble using 3M weatherstrip adhesive - but always have success with this tape.

Thanks,

-Richard
User avatar
doublegarage
Posts: 212
Joined: Thu Nov 14, 2013 4:22 am
Dino: Fiat Dino 2.4 Coupe
Location: California, USA

Re: WTB 2400 Coupe A-pillar trim piece

Post by doublegarage »

replying again to my own post here in the hope that someone has these little stainless rails that hold a rubber strip on the Fiat Dino Coupe doorframe. Trying to stop the amazing wind noise I get on the driver's side.

If anyone could take some good pictures of how the weatherstripping is arranged/attached above the door-hinge area (i.e. below the quarterlight) that would be great.

Thanks,

-Richard
alfredino
Posts: 61
Joined: Mon Oct 26, 2015 1:29 pm
Dino: Fiat Dino 2.4 Coupe

Re: WTB 2400 Coupe A-pillar trim piece

Post by alfredino »

Hi Richard,

I have this small stainless steel part :D

Regards Alfredino
Last edited by alfredino on Thu Dec 09, 2021 3:00 pm, edited 1 time in total.
User avatar
doublegarage
Posts: 212
Joined: Thu Nov 14, 2013 4:22 am
Dino: Fiat Dino 2.4 Coupe
Location: California, USA

Re: WTB 2400 Coupe A-pillar trim piece

Post by doublegarage »

Over a year ago, Alfredino found me this piece for the driver's (Left) side of the car - still looking for the same piece for the Right side. I just had the passenger door in 100 pieces to renew the window channel and all the other door rubber - therefore it exposed that I'm missing this small stainless strip and the little blade of rubber that should be fitted to it.

Does anybody have one?

Thanks,

-Richard
Post Reply