wanted; air box + various 2.4 coupe parts

[DinoTomNL]

Hello,

For my Dino Coupe 2400 I am still looking for this:

- 1 black plastic surrounding around door lock front doors. part no 4147976 (L1.09)
- round air vent valve fitted in the rear of the car, Right hand.
- (glove) box for in tunnel between handbrake and second ash tray
- air boxes fitted in the rear of the front wheel arches + valves in the interior, photos/dimensions on how to make one myself are fine as well.
- battery cover (or drawings on how to make one myself)
- long black plastic ventilation unit which is directs the air to the feet of rear passengers and is fitted in the tunnel.
- empty dinoplex case for 2.4 dino coupe 1971.

If you have any or tips where to get it, please let me know.

Kind regards
Tom van Remmen

[doublegarage]

Hi Tom,

did you ever find a battery box for your Dino? or receive any info on how to make one? I finally saw one this weekend so now I know I need one.

Also - what about a source for those door lock covers - I bet everybody needs a set of those?

Thanks,

-Richard

[The Dutch Dino]

Hi Tom, I think I have quite a few of the parts you are looking for.
Rear air vent.
Lock surround plastic part.
Center console parts.
Ashtray.

I will have a look over the weekend to be sure.

[The Dutch Dino]

Sorry Tom, less parts than I thought. I have a center tunnel, but the long plastic vents and thenglove box are not in it.
I do have both types of ash trays if you need them.
And one rear plastic air vent in reasonable but not perfect condition.
Also several door parts available like the round dials for the rear and front vent windows, and plastic bits to lock the door, but not the plastic surround.
Let me know if you want anything from this tather short list...

[DinoTomNL]

@ Leo, Thanks for your reply! The Dino project was a bit on hold here due to other projects.... The only thing I might can use is the air vent which is in the rear.
I will PM you for a photo.



@ Richard; the battery cover is made out of rubber I believe. Didnt find the plastic surrounding for on the doorcard, maybe its possible to get them 3d printed in the near future? Or perhaps there is a car where they are also used on?


Regards
Tom

[The Dutch Dino]

Tom, I found them om eBay:
http://pages.ebay.com/link/?nav=item.vi ... 1402669088

[dinoverde]

Hi
I do have the long air box vents attached to the side of the console in the dino coupe.
Hervé

[DinoTomNL]

Thanks for your reply's! A week ago or so I located one here in Holland and it is already installed!


I also located some other items, so now I only need:

- empty dinoplex case for 2.4 dino coupe 1971.
- battery cover (or drawings on how to make one myself)
- valves which are located in the car's footwell which regulate the air
- 1 black plastic surrounding around door lock front doors. part no 4147976 (L1.09)
- ADDED: Heater switch knob (2 speeds) which is of the same style as the rest of my dash switches. See photo. (now I got a 'wrong' looking one which doesnt function right either)


Regards
Tom

[Emanuel H]

For the heater switch, look on Ebay: 161509502031 or 400805360160 or 300835594170.

Emanuel

[ThomasK]

I have one, if you are interested please give me a hint via PM or on thomas.kraeker@daimler.com