Plastic parts needed for 2.0 Coupe

For Sale and Wanted (commercial postings will get you banned)

Moderators: doublegarage, Philt68

Post Reply
outofaustin
Posts: 10
Joined: Fri Aug 12, 2016 5:17 pm
Dino: Fiat Dino 2.0 Coupe

Plastic parts needed for 2.0 Coupe

Post by outofaustin »

Find below pictures of two parts which I need for my 2.0 Coupe. A third part I don't picture but I describe it.
1. This is the spacer that lives between the window frame and the inner door frame. This is a picture of the one that lives in the right door. I need its mirror image that lives in the left door.
2. This is the grillwork that lives in the air outlet in the front fenders. I have the one for the left side but need the one for the right.
3. I don't picture this part: it's the tube through which the wiring harness travels in the door jamb. I need one; it's the same side per side.
Again many thanks in advance for any leads.
Ben Schotz
2.0 Coupe 1463
Attachments
Ft fender side vent screen.JPG
Ft fender side vent screen.JPG (102.88 KiB) Viewed 6144 times
Door to window frame spacer.JPG
Door to window frame spacer.JPG (86.25 KiB) Viewed 6144 times
User avatar
ThomasK
Posts: 187
Joined: Mon Dec 30, 2013 12:44 pm
Dino: Fiat Dino 2.4 Coupe

Re: Plastic parts needed for 2.0 Coupe

Post by ThomasK »

The grillwork inside the air outlet in the front Fenders does not look original. Someone should post a photo of the original grillwork. Unfortunately i am away from home (and may garage) at the moment.
Greetings, Thomas
outofaustin
Posts: 10
Joined: Fri Aug 12, 2016 5:17 pm
Dino: Fiat Dino 2.0 Coupe

Re: Plastic parts needed for 2.0 Coupe

Post by outofaustin »

You're absolutely right, I think. I mistakenly posted a picture of the metal screening that a previous owner had installed for the missing plastic grill. Find below a proper picture of the one I have. I need the right side one.
And I also attach here a picture of the wiring loom tube that lives in the door jambs. I need one.
Thanks for noticing.
Ben
Attachments
door jamb wiring loom tube.JPG
door jamb wiring loom tube.JPG (121.54 KiB) Viewed 6119 times
Ft fender grillwork.JPG
Ft fender grillwork.JPG (115.35 KiB) Viewed 6119 times
Georg
Posts: 198
Joined: Thu Jan 02, 2014 6:55 pm
Dino: Fiat Dino 2.4 Spider
Location: Germany

Re: Plastic parts needed for 2.0 Coupe

Post by Georg »

Hi Ben, I think I can help. I have sent you a Private Message.
Georg
Attachments
IMG_9610.JPG
IMG_9609.JPG
outofaustin
Posts: 10
Joined: Fri Aug 12, 2016 5:17 pm
Dino: Fiat Dino 2.0 Coupe

Re: Plastic parts needed for 2.0 Coupe

Post by outofaustin »

Hi Georg
Again Thanks. I sent you a private message with my email address and where I live.
Best
Ben
Post Reply