Photos of coupe inner body section needed.

All about our Fiat Dino Coupes and Spiders

Moderators: doublegarage, Philt68

4cambob
Posts: 111
Joined: Sat Sep 24, 2016 9:19 am
Dino: Fiat Dino 2.0 Coupe

Photos of coupe inner body section needed.

Post by 4cambob »

I would be grateful if someone has a photo of the panel between the front wing/fender and the A pillar box section where the door hinges mount to. The lower section of mine was just thin air due to rust and I need to fabricate a new one. These are photos of the area and the finished hinge mounting box section.
Attachments
fiat 610.jpg
fiat 609.jpg
fiat 566.jpg
Georg
Posts: 198
Joined: Thu Jan 02, 2014 6:55 pm
Dino: Fiat Dino 2.4 Spider
Location: Germany

Re: Photos of coupe inner body section needed.

Post by Georg »

Does this help?
Attachments
Bild010.jpg
Ribolla_67
Posts: 116
Joined: Thu May 19, 2016 9:53 am
Dino: Fiat Dino 2.4 Coupe

Re: Photos of coupe inner body section needed.

Post by Ribolla_67 »

IMG_1210.jpg
IMG_1209.jpg
Found these pictures, maybe helpful. Fortunately NOT my car...
Ribolla_67
Posts: 116
Joined: Thu May 19, 2016 9:53 am
Dino: Fiat Dino 2.4 Coupe

Re: Photos of coupe inner body section needed.

Post by Ribolla_67 »

... the bodywork spare parts catalogue may help as well...
4cambob
Posts: 111
Joined: Sat Sep 24, 2016 9:19 am
Dino: Fiat Dino 2.0 Coupe

Re: Photos of coupe inner body section needed.

Post by 4cambob »

Thank you very much Georg,yes that is what I was looking for. I would also like to ask if you know how the front wing attaches to the outer sill where there would be a visible vertical groove. I would guess this would be brazed/gas welded, certainly not spot or mig welded.
4cambob
Posts: 111
Joined: Sat Sep 24, 2016 9:19 am
Dino: Fiat Dino 2.0 Coupe

Re: Photos of coupe inner body section needed.

Post by 4cambob »

Thank you Ribolla_67 . And there was I thinking my car must be the only rusty car out there. It seems this area is very susceptible to corrosion. I will at a latter stage try and fabricate a fibreglass inner wheel arch as there are too many items under the front wings which are all exposed . This is the first time I have seen the parts catalogue,it is very useful to see.
User avatar
Tobi
Site Admin
Posts: 528
Joined: Thu Nov 14, 2013 7:56 am
Dino: Fiat Dino 2.4 Coupe
Location: Upper Palatinate - Bavaria

Re: Photos of coupe inner body section needed.

Post by Tobi »

4cambob wrote:This is the first time I have seen the parts catalogue,it is very useful to see.
You might find more helpful material in the Library section of this forum ;)
Fanalone
Posts: 122
Joined: Wed Jul 01, 2015 7:15 pm
Dino: Fiat Dino 2.4 Coupe

Re: Photos of coupe inner body section needed.

Post by Fanalone »

Hi


German company Lokari produces inner wings for many brands also to our Fiat Dino's:
https://www.lokari.de/epages/62716287.s ... -0599-0600
BC5222
Argonaut
Posts: 130
Joined: Wed Apr 23, 2014 4:41 pm
Dino: Fiat Dino 2.0 Spider

Re: Photos of coupe inner body section needed.

Post by Argonaut »

Be careful... only buy from American companies... Donald is after you :D
maduno
Posts: 20
Joined: Sat Sep 05, 2015 12:19 am
Dino: Fiat Dino 2.4 Coupe

Re: Photos of coupe inner body section needed.

Post by maduno »

Has anyone used these inner liners from Lokari on their coupe?The standard arrangement with no mud and water protection is very poor and liners if possible to use would seem like a good outcome.
Post Reply