Dino Coupé 2000 Vent Box Rubbers

Technical Topics and Discussions

Moderator: alh

Post Reply
AndrewMcCrae
Posts: 39
Joined: Mon Mar 16, 2020 10:52 pm
Dino: Fiat Dino 2.0 Coupe
Location: Ireland

Dino Coupé 2000 Vent Box Rubbers

Post by AndrewMcCrae »

This is the approximate cross section. The overall ring diameter is approximately 155mm. Although the best way to set the dimension is to measure the flange diameter on the box.

With this, is there somebody who speaks Italian who can speak to Cicognani and get a price? For production they could use a seal and measure with a shadow graph or CMM.
IMG_20220111_212921.jpg
IMG_20220111_210918.jpg
IMG_20220111_212838.jpg
AndrewMcCrae
Posts: 39
Joined: Mon Mar 16, 2020 10:52 pm
Dino: Fiat Dino 2.0 Coupe
Location: Ireland

Re: Dino Coupé 2000 Vent Box Rubbers

Post by AndrewMcCrae »

And the rectangular seal outer dimensions are 145mm x105mm. Again the most accurate way is to measure the box it has to fit onto and use a Shadow graph or CMM to measure the section.
IMG_20220111_213736.jpg
IMG_20220111_213831.jpg
Post Reply