Hello all
I am looking to replace the air ventilation grill & units in my Dino Spider 2000 (1968).
I can see the part number in the catalogue. I can see one of these at DinoParts for quite a lot of money.
https://www.dinoparts.com/en/detail/ind ... icle/21680
I was told a while back by a specialist that they came from the Fiat parts bin. But when we tried the same from a Fiat 124 Spider this was too small. There is a chance the seller may have muddled this with a Fiat 128 unit based on what was sent.
Any ideas?
Many thanks
Rob
Air ventilation grill & unit
Moderator: alh
-
- Posts: 30
- Joined: Fri Jun 06, 2014 8:27 pm
- Dino: Fiat Dino 2.4 Coupe
Re: Air ventilation grill & unit
I have 2 of these for sale (from a 2400 coupe) BRGDS, Hans
Re: Air ventilation grill & unit
Hello Hans!
Thanks for replying. I think the Coupe may be different to the Spider? The parts catalogue isn’t so clear for the Coupe but if I read this correctly the parts number is different…
You may well know otherwise!
Thanks
Rob
Thanks for replying. I think the Coupe may be different to the Spider? The parts catalogue isn’t so clear for the Coupe but if I read this correctly the parts number is different…
You may well know otherwise!
Thanks
Rob
-
- Posts: 30
- Joined: Fri Jun 06, 2014 8:27 pm
- Dino: Fiat Dino 2.4 Coupe
Re: Air ventilation grill & unit
Hi Rob,
The link on Dino Part's homepage that you are referring is actually incorrect and referring to a coupe. Instead they should have referred to table L.3.02 and part no. 4148142 for the coupe valve. I do not know whether the vale for the spider is identical. Best regards, Hans
The link on Dino Part's homepage that you are referring is actually incorrect and referring to a coupe. Instead they should have referred to table L.3.02 and part no. 4148142 for the coupe valve. I do not know whether the vale for the spider is identical. Best regards, Hans