Reproduction of interior parts for Fiat Dino Spider 2000 Series 1

[agnatus]

Since most of the interior panels in my Fiat Dino Spider 2000 Series 1 project were missing or broken and are no longer available from well-known dealers (Dinopoint, Dinoparts & Co.), I asked a friend who specializes in CAD Design, 3D scanning and 3D printing to replicate these parts...

First he made the covering for the "half" center column...

In the photos you can see the current version for the passenger side as a 3D print
The covering is a little longer than the original... so it can be individually adjusted (e.g. shortened).

Furthermore, the covering can be precisely adapted to the body by heating it with a hot air gun. Not all panels are always completely straight. The whole thing is then covered with leather or imitation leather.

If anyone needs these parts, please contact me.

[Gaelicguy]

Very nice replica, I’ll check mine today,
Thanks for doing by this
Michael

[Gaelicguy]

Very nice replica, I’ll check mine today,
Thanks for doing this. One part I’m sure I need is the plastic trim cover on the frame for the top. You might not even know you need it yet I’ll send a pic and the part numbers.
Michael

[Gaelicguy]

This is the plastic cover trim on the frame of the later style top frame.
This is the drivers side and it fits at the front of the frame where the frame touches the windshield. (i only have this damaged d/s one)
Anybody have spares or needs these parts?
Michael

[Gaelicguy]

Sorry, pics didn't attach

[agnatus]

Dinopoint in Bergamo has these parts you are looking for..

https://sites.google.com/view/ricambidi ... authuser=0

dinopoint 1.JPG (24.03 KiB) Viewed 3845 times

[Gaelicguy]

Thanks very much,
I did look at Dinopoint but didn’t see them. I’ll look again. And thanks for the speedo cable advice.
I’ll let you know how it goes!
Michael