Hazard light system

[mdl90]

Hi,

I would like to install a hazard light system integrated on the dashboard (like below)

I got the hazard switch "cavis" and an additional flashing relay 4 pins.

On my car, there are 2 originals red wires not connected behind the dashboard, one for the radio and the other for power supply to a hazard switch or relay ?

Has anyone added this system ? Or an original wiring on his car ?

It'd be a big help

Thank you,

[Dinoswede]

You can add a 4-way Hazard function, by using a "modern" standard indicator relay from the 90´ies.

For instance something like this:

relä.png (126 KiB) Viewed 108 times

Note, as the Dinos have only one turn signal warning light, you must add a simple diode bridge, like
in the wiring diagram below. Otherwise this type of indicator relay will not work in our cars.

Dinoswede

[DinoinATL]

I have a series 1 1967 Dino Spider, does my car have a factory installed hazard light switch? I've looked through the manuals and don't believe the car has a hazard light switch but correct me if I am wrong?

[agnatus]

Good morning..
The 1967 Dino Spider Series 1 did not come with a factory-installed hazard light system..

For this switch, I welded a small piece of angled metal next to the choke cable mount under the dashboard and simply mounted it there.

Alternatively, you could also mount the switch in the center console.
It’s very easy to connect to the existing wiring in the Dino Spider.

https://aire-viento.de/Schalter-Relair- ... 7-Kontakte

blinker-plan.JPG (27.49 KiB) Viewed 23 times